Eyebrow Dye Deep Brow Tint 2.0 20 ml

1. Before dyeing, degrease and clean the skin and hair.

2. Give the desired shape to the eyebrows using conventional shaping tools.

3. Squeeze the “Deep Brow Tint 2.0” dye into a non-metallic container. Mix with ELAN 2% or 3.5% oxidant in a 1:1 ratio.

Note: After opening the package, the color of the dye may change from light brown to black due to contact with air. This is normal and does not affect the final result of dyeing.

4. Apply the prepared mixture to the eyebrows, forming the desired shape. Keep the dye for 5 to 10 minutes, depending on the desired intensity. After the specified time, remove excess dye with a cotton pad moistened with water.

5. To fix the result, apply ELAN COLOUR FIX to the eyebrows.

Precautions:

Before use, it is necessary to perform an allergy test - 48 hours before dyeing, mix 2 drops of dye with oxidizing emulsion and apply to a small area of ​​skin on the inside of the elbow. If there is no redness, itching or swelling, the product can be used.

Do not use the dye if: You have skin rashes, sensitive, irritated or damaged scalp; You have previously had an allergic reaction to hair dye; You have experienced an allergy to black henna temporary tattoo dye.

Additional safety rules: Wear protective gloves during the procedure. Do not use metal containers or tools. The dye cannot be used on eyelashes. Avoid contact with eyes - if it gets into your eyes, rinse immediately with water. After dyeing, rinse the product thoroughly. If an allergic reaction occurs, consult a dermatologist.

The product is intended for professional use only. It is not recommended for persons under 16 years of age.